VL-850

MACHINING CENTER

VERTICAL MACHINING CENTER

 

 

 

 

 

  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm.

 

 

 

UH-400/1000AGC

GRINDING
UNIVERSAL GRINDING

* Heavy bed provides a rigid base to carry all units and possesses great stiffness, sufficient slideway length to support the table in all position.
* Eight-speed type workhead with all belt driven provides full power at all speeds.
* Wheel spindle is induction hardened and precision ground.
* Wheel spindle lubricates automatically and is electrically interlockes with motor. These ensure the durability of the grinding wheel spindle and bearings, and also the roundness, superior finishing of the workpiece.
* Hydraulic table traverse has end dwell at both ends of the stroke, and is equipped with independent, stepless speed controls, for both directions.

 

 

MH-500

MACHINING CENTER
HORIZONTOL MACHINING CENTER

 

 

  • Powerful 20 hp Spindle Motor
  • 10000 Rpm Spindle
  • Swing Arm Type ATC, 40/60 Tools
  • Dual Pallets Swing Type APC System
  • Heat Exchanger for Electrical Cabinet
  • Chip Conveyor and Chip Bucket
  • C2 Class Double Anchored Ballscrews
  • Rigid Tapping & Helical interpolation Function
  • Bell-Shaped Acc./Dec Before Look Ahead Interpolation
  • Al Advanced Preview Control

Extremely Rigid Mobile Column Structure

Extremely Rigid Mobile Column with linear guide ways assures stability and cutting accuracy while allowing rapid traverse of the X,Y and Z axes.

 

High Speed Linear Guideways

Rugged massive linear guideways on X,Y and Z axes maintain precision and assures a rapid traverse rate.

 

Pallet Changer

The APC twin pallet system is manually indexed with standby pallet during work piece loading and unloading, and is ideal for automatic machining.

 

Automatic Tool Changer

The tool magazine, coupled with rapid tool change and random access selections, saves time and increases productivity. A servomotor controls the magazine to produce smooth, precise, and reliable positioning. MH-500:STD 40, OPT 60

 

High Precision & Rigid Spindle

Durable and accurate spindle bearings provide high torque, rigidity and precision. The high torque spindle motor and spindle support bearing arrangement provides an efficient cutting performance.

MH-630

MACHINING CENTER

HORIZONTOL MACHINING CENTER

 

 

High Speed Linear Guideways

Rugged massive linear guideways on X, Y and Z axes maintain precision and assures a rapid traverse rate.

 

Automatic Tool Changer

The tool magazine, coupled with rapid tool change and random access selections, saves time and increases productivity. A DC motor controls the magazine to produce smooth, precise, and reliable positioning. STD 60, OPT 80

 

Extremely Rigid Mobile Column Structure

Extremly rigid Mobile column with linear guide ways assures stability and cutting accuracy while allowing rapid traverse of the X, Y and Z axes.

 

Tool Measuring System (Opt)

Reduce machine down time and saving machining time. By precisely tool length and diameter measuring; tool offset can be automatic compensated. Broken tool inspection can be executed under machining cycle.

 

High Quality Cast Iron Frame 

For the ultimate in rigidity and stability, the MH-630 employs Meehanite, the finest alloy in the word.

 

Word Piece Measuring System (Opt) 

Allows work piece measurement and automatic work piece offset compensation during the machining cycle. Reduces machine down time from initial work piece  manual measuring. Probe operating range is 360 with infra-red transmissions up to 4M

 

 

TP510-APC

MACHINING CENTER

TAPPING CENTER

  • APC- Work table can be divided into two working areas to lower table exchange time.
  • Spindle direct type design, reduce noise, backlash, vibration.
  • Enlarged 3 axis ball screw design with high stiffness.
  • Enlarged foundation block and strengthened machine base.
  • Cutting chips are efficiently conveyed to the rear side of machine, chip removal is reliable and efficient.

VD-510S

MACHINING CENTER

TAPPING CENTER

  • Front side disc type ATC
  • Multi-link floating arm structure design efficiently shortens tool change time and reduces the vibration. Build-in SENSOR with high distinguishable signal light is designed for easy maintenance. Light weight aluminum alloy but rigid structure of magazine body & tool disc decreases Light weight aluminum alloy but rigid structure of magazine body & tool disc decreases magazine rotating inertia and spindle inertia load. High toughness compound gripper protects spindle during tool change. Individual unit design on grippers allows easy replacement after long period of use or consuming.
  • ATC springs and fix bolts
  • Big size alloy springs offer quick & smooth tool change and extend its service life. Fix bolts on each end of the spring are made of titanium alloy, which assures longer service life of ATC.
  • High rigidity, high efficient design
  • X & Y axes rapid feed rate is 48 M/min, Z axis is 60 M/min. New disc type ATC remarkably shortens SENSOR reaction time. Tool change time is only 1.6 sec (T-T), 2.5 sec (C-C), 2.8 sec (Opposite Side) by servo motor. (With inverter motor, tool change time is 1.8 sec (T-T), 2.8 sec (C-C), 3.5 sec (Opposite Side).) Rigid casting design provides sufficient rigidity during high speed movement and heavy cutting, which is not only suitable for drilling & tapping but also for engraving & milling.
  • Machining examples
  • Spindle motor
  • With new type Mitsubishi low inertia spindle motor, spindle response time is greatly shortened. It takes only 1.0 second for spindle to run up to 12000 rpm from 0 rpm. During continuous & repeating acceleration or deceleration rigid tapping process such spindle speed cooperates with 3 axes rapid movement can greatly shorten machining time and improves machining efficiency.
  • Full enclosed index cam
  • Full enclosed index cam structure ensures the stability of the parts in ATC which also prevents the dust & mist generated during the machining. Servo motor and inverter motor for ATC rotating position are both available. Transmission is by high precision ground gear.

 

Neucut-S55T

EDM & WIRECUT

WIRE-CUT

 

 

 

  1. Two machine componet in one machine unit design, fit for ergonomic operation.
  2. 5 Axes apply HEIDENHAIN linear scale connect as close feedback circuit loop for assurance of accuracy positio.
  3. Apply Linear bearing (cylinder type) guideway THK brand on 5 axes for durable and prcisely operation.
  4. Constant temperature setting Coolant unit equip on water tank which is saving space and efficient in cooling capability.
  5. Feed clean water into operation tank with excellect circulation ability of pump to ensure the wire cutting effect.
  6. Three pieces of filter element ensure filtration effencient and durable usage Ion exchange unit with reverse wash function to prolong the ion resin use life cycle.

 

 

KF-10E

ACCESSORIES

OIL SKIMMER

 

  • Easy to install. Suitable for all oil mist generated from working machine.
  • High Efficiency. Small size. Easy to install in small factory area, or machines.
  • Improve air quality inside factory. Raise labor’s working efficiency.
  • Separate air and oil from oil mist efficiently. Easy to clean.
  • Absorb 99.5% of 0.3μm particles.
  • Absorb toxic gas generated from cutting process.
  • Filter is in annular folding shape, to increase absorbing power.
  • Less noise, high absorbing power. Save electricity.
  • Collected oil can be reused 95% after collected from our product.
  • Use European Regulation E11 filtering material to filter suspended particle pm2.5 effectively.

Message Us!
close slider

Name

Email

Subject

Message