VH-510

MACHINING CENTER

VERTICAL MACHINING CENTER

  • BT-40 / CAT40 / DIN40 spindle (Φ120mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ32mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm

VH-610

MACHINING CENTER

VERTICAL MACHINING CENTER

  • BT-40 / CAT40 / DIN40 spindle (Φ120mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Box-way machines are coated with Turcite by professional hand-scrapping in 20 dots/ inch2.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm

VH-850

MACHINING CENTER

VERTICAL MACHINING CENTER

 

  • BT-40 / CAT40 / DIN40 spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm.

VH-1000

MACHINING CENTER

VERTICAL MACHINING CENTER

  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Special design Weight Balance leadscrew with needle bearings for better support and smooth movement.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm

VH-1100

MACHINING CENTER

VERTICAL MACHINING CENTER

  • Spindle variety: Belt type, Direct type, Built-in, Gear type (VHG series) are available for heavy duty cutting or high speed machining.
  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • All solid ways on base provides precise rigidity under heavy cutting conditions.
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Y travel 700mm keeps superior rigidity and stability.
  • Main frame is made of Meehanite casting for superior rigidity.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm.

 

VH-1300

MACHINING CENTER

VERTICAL MACHINING CENTER

 

 

 

 

  • Spindle variety: Belt type, Direct type, Built-in, Gear type (VHG series) are available for heavy duty cutting or high speed machining.
  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • All solid ways on base provides precise rigidity under heavy cutting conditions.
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Y travel 700mm keeps superior rigidity and stability.
  • Main frame is made of Meehanite casting for superior rigidity.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm.

VH-1600

MACHINING CENTER

VERTICAL MACHINING CENTER

  • Spindle transmission can be through gears, which offers more torque for heavy duty machining.
  • Japan made Hi-Low gears are made of Cr-Mo alloy steel and ground to JIS Zero grade, offering low noise and heavy duty machining.
  • With BT50/CAT50/DIN50 600RPM Gear Head spindle (Ø190mm), spindle oil cooler 6000BTU is standard. Optional spindle: BT40/CAT40/DIN40 8000RPM Belt type and Direct type.
  • Hardened & Ground C3 Double-Nut ballscrews (Ø50mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • All solid ways are coated with high grade Turcite-B.Hardened & Ground slideways give extra 40% wear resistance.
  • Four slideways on the base provide precise rigidity under heavy cutting conditions.
  • Standard with table rear side screw type chip conveyor for easy chip removal.
  • Main frame is made of Meehanite casting for superior rigidity.
  • Positioning accuracy: ±0.005mm/300mm. Repeating accuracy: ±0.003mm/300mm.

VH-2000

MACHINING CENTER

VERTICAL MACHINING CENTER

 

  • Spindle transmission can be through gears, which offers more torque for heavy duty machining.
  • Japan made Hi-Low gears are made of Cr-Mo alloy steel and ground to JIS Zero grade, offering low noise and heavy duty machining.
  • With BT50/CAT50/DIN50 600RPM Gear Head spindle (Ø190mm), spindle oil cooler 6000BTU is standard. Optional spindle: BT40/CAT40/DIN40 8000RPM Belt type and Direct type.
  • Hardened & Ground C3 Double-Nut ballscrews (Ø50mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • All solid ways are coated with high grade Turcite-B.Hardened & Ground slideways give extra 40% wear resistance.
  • Four slideways on the base provide precise rigidity under heavy cutting conditions.
  • Standard with table rear side screw type chip conveyor for easy chip removal.
  • Main frame is made of Meehanite casting for superior rigidity.
  • Positioning accuracy: ±0.005mm/300mm. Repeating accuracy: ±0.003mm/300mm.

VH-2200

MACHINING CENTER

VERTICAL MACHINING CENTER

  • Spindle transmission can be through gears, which offers more torque for heavy duty machining.
  • Japan made Hi-Low gears are made of Cr-Mo alloy steel and ground to JIS Zero grade, offering low noise and heavy duty machining.
  • With BT50/CAT50/DIN50 600RPM Gear Head spindle (Ø190mm), spindle oil cooler 6000BTU is standard. Optional spindle: BT40/CAT40/DIN40 8000RPM Belt type and Direct type.
  • Hardened & Ground C3 Double-Nut ballscrews (Ø50mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • All solid ways are coated with high grade Turcite-B.Hardened & Ground slideways give extra 40% wear resistance.
  • Six slideways are on a One-piece Base instead of two supporting ways connected to the main base, providing more rigidity under heavy duty machining. Standard with two auger type chip conveyors on Y axis for easy chip removal.
  • Main grame is made of Meehanite casting for superior rigidity.
  • Positioning accuracy: ±0.005mm/300mm. Repeating accuracy: ±0.003mm/300mm.

Message Us!
close slider

Name

Email

Subject

Message