VL-850

MACHINING CENTER

VERTICAL MACHINING CENTER

 

 

 

 

 

  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm.

 

 

 

VL-510

MACHINING CENTER

VERTICAL MACHINING CENTER

 

  • Reliable Armless Type ATC

The 12T (VL-510) or 16T (VL-610) armless type ATC unit is employed. The 20T (VL-510) or 24T (VL-610) arm is optional.

  • Manford VL-510 /610

The enhanced rigidity of the spindle head and machine structure is the solid platform for high speed cutting.

Axis motors arm direct coupled with ball screws, featuring highly efficient motion control, high response and low noise.

 

 

 

VL-550

MACHINING CENTER

VERTICAL MACHINING CENTER

  • BT-40 / CAT40 / DIN40 spindle (Φ120mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ32mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm

 

 

VL-610

MACHINING CENTER

VERTICAL MACHINING CENTER

 

 

 

 

  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ120mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm

 

 

VL-1000

MACHINING CENTER

VERTICAL MACHINING CENTER

 

 

 

 

 

 

  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Special design Weight Balance leadscrew with needle bearings for better support and smooth movement.

 

 

 

A-600

MACHINING CENTER

VERTICAL MACHINING CENTER

 

*AGMA once again presents high speed A-series machining centers to a foresighted customer like you with industry-leading scraping technology of hardened box way and the technological capacity of manufacturing process.

This series of machines are based on high-rigidity Meehanite cast iron and adopt 10,000/12,000/15,000RPM direct driven spindle. Three axes adopt high precision linear guideways and ball screws. Other optional accessories which fully comply with a variety of cutting demand are also available.

Synchronously adopt the European & Japanese design
1. Wide-span rigid column
2. Taiwan-made PMI extra-large 30mm precise roller- rail linear guide way (option)
3. Adopt high-end direct motors and high rigidity couplings in three axes

Extra-large Z-axis motor
1. 3.0KW (no counter balance design)

High reliable and high accuracy ballscrew design
1. Ø30mm high class double nut provides strong rigidity, high torque, better accuracy, long-life, and effectively heat extension control.

Extra wide door design
1. The width of door reaches 725mm for conveniently loading and unloading the fixture and workpiece.

Extra wide door design
The width of door reaches 725mm for conveniently loading and unloading the fixture and workpiece.

Stable air supply equipment
1. The gas storage barrel assists to acquire steady air source to increase equipment utility rate.

Unique Column Design
Single central screw type chip auger collocates left and right sides flush toremove the chip from front to back.

Chip Auger motor shrinks within to reduce the distance of the front sheet metal for ergonomics improvment on the ease of workpieces loading and unloading.

 

VL-1200

MACHINING CENTER

VERTICAL MACHINING CENTER

  • The sufficient depth from spindle center to machine column not only accommodates 700mm Y axis travel but also enables easy access for large diameter facing milling cutter.
  • Full support Y axis with 4 roller linear guide ways.
  • Six Roller Shoes are employed on the machine column that firmly supports the headstock to perform heavy duty cutting.
  • 45 mm Oversized Ball Screws, the VL1300 employs high precision fine ground ball screws for optimum motion control accuracy.
  • The double chip augers deliver chips out of machine during cutting, that prevent chips from depositing in the machine.
  • Another benefit is to save time in chip removing by the operator.

 

 

VL-1300

MACHINING CENTER

VERTICAL MACHINING CENTER

  • The sufficient depth from spindle center to machine column not only accommodates 700mm Y axis travel but also enables easy access for large diameter facing milling cutter.
  • Full support Y axis with 4 roller linear guide ways.
  • Six Roller Shoes are employed on the machine column that firmly supports the headstock to perform heavy duty cutting.
  • 45 mm Oversized Ball Screws, the VL1300 employs high precision fine ground ball screws for optimum motion control accuracy.
  • The double chip augers deliver chips out of machine during cutting, that prevent chips from depositing in the machine.
  • Another benefit is to save time in chip removing by the operator.

 

 

VL-1600

MACHINING CENTER

VERTICAL MACHINING CENTER

  • The sufficient depth from spindle center to machine column not only accommodates 700mm Y axis travel but also enables easy access for large diameter facing milling cutter.
  • Full support Y axis with 4 roller linear guide ways.
  • Six Roller Shoes are employed on the machine column that firmly supports the headstock to perform heavy duty cutting.
  • 45 mm Oversized Ball Screws, the VL1600 employs high precision fine ground ball screws for optimum motion control accuracy.
  • The double chip augers deliver chips out of machine during cutting, that prevent chips from depositing in the machine.
  • Another benefit is to save time in chip removing by the operator.

 

 

Message Us!
close slider

Name

Email

Subject

Message