RSB-25

CNC LATHE

SWISS TYPE

 

 

 

 

 

RSB has main and sub spindle and front and back tooling system, RSB is equipped with C1/C2 axis and X1/Y1/Z1/X2/Z2 precision axis system. It allows many kinds of tools simultaneously working on the same or different work piece to shorten the processing time. The Swiss type RSB series CNC auto lathe center is designed to allow the customer to select the appropriate configuration for given application.

Revolving Guide Bush can be ratate with high speed which can less surface damage ang efficient increase working performance

Non-Guide Bush Unit which minimizes the residual material length to save material cost.

  • 7 Axis simultaneously Control (X1/Y1/Z1/X2/Z2/C1/C2).
  • C-axis on both main and back spindles.
  • Disc brakes on both main and back spindles.
  • Guide Bush and Non-Guide Bush Design.
  • Powerful Mitsubishi built-in motor spindles for main and back spindles. (Optional)

 

 

 

RSB-32

CNC LATHE

SWISS TYPE

 

 

 

 

RSB has main and sub spindle and front and back tooling system, RSB is equipped with C1/C2 axis and X1/Y1/Z1/X2/Z2 precision axis system. It allows many kinds of tools simultaneously working on the same or different work piece to shorten the processing time. The Swiss type RSB series CNC auto lathe center is designed to allow the customer to select the appropriate configuration for given application.

Revolving Guide Bush can be ratate with high speed which can less surface damage ang efficient increase working performance

Non-Guide Bush Unit which minimizes the residual material length to save material cost.

  • 7 Axis simultaneously Control (X1/Y1/Z1/X2/Z2/C1/C2).
  • C-axis on both main and back spindles.
  • Disc brakes on both main and back spindles.
  • Guide Bush and Non-Guide Bush Design.
  • Powerful Mitsubishi built-in motor spindles for main and back spindles. (Optional)

 

 

MVL-12

CNC LATHE

VERTICAL LATHE

 

  1.  Hydraulic-Driven crossrail elevation
  2.  Rail positioning system
  3.  Tool holder system coromant capto (Optional)
  4.  Floor type ATC system
  5.  Twin gear drive
  6.  One piece casting for saddle
  7.  Table drive gearbox

The table rotation is transmitted through a proprietary gearbox, providing high / low speed ranges. A forced circulated lubricatuon system is used for lubricating gears.

8.  Gear reducer on X/Z Axis

X/Z axes are transmitted through gear planetary reducers to increase torque, ensuring stability for heavy cutting conditions.

9.  Table bearings

Ample thrust ang radial bearing provide execellent loading capacity for workpiece and table and greater cutting force resistance.

MVL-16

CNC LATHE

VERTICAL LATHE

 

 

Two speed gear box

  • The gearbox employs an oil cooler for lubrication and cooling, ensuring a constant temperature in the gearbox.

Milling spindle motor

  • The fanuc driven milling spindles is transmitted through a robust gear box, providing increased torque.
  • Max  high speed is 3000 rpm.

Ram head and BT-50 clamping system

Head type is square ram. It

  • provides maximum stability during heavy cutting.

Square ram is balance by

  • Hydraulic ram cylinder built in saddle. Hydraulic counter balance protect ram drop by magnetic brake equipment with Z-axis servo motor and pilot check valve at power failure.

CF Axis

Twin gear drive Backlash free & High rigidity

  • The c-axis is driven by servo motor combined with transmission through double worms for smooth rotation and minimized backlash.

Table drive gearbox

  • The table rotation is transmitted through a proprietary gearbox, providing high / low speed ranges. A forced circulated lubrication system is used for lubricating gears.

Gear reducer on X/Z Axis

  • X/Z axes are transmitted through gear planetary reducers to increase torque, ensuring stability for heavy cutting conditions.

Table bearings

  • Ample thrust and radial bearing provide excellent loading capacity for workpiece and table and greater cutting force resistance.

Coolant through spindle (CTS)

  • The CTS is applied when performing milling operations.
  • The coolant through spindle device delivers coolant at 20 bars of pressure to the cutting edge, allowing the machine to perform deep hole drilling. (only for MVL-M)

 

 

MVL-20

CNC LATHE

VERTICAL LATHE

 

 

Two speed gear box

  • The gear box employs an oil cooler for lubrication and cooling, ensuring a constant temperature in the gearbox.

Milling spindle motor

  • The fanuc driven milling spindle is transmitted through a robust gear box, providing increased torque. Max high speed is 3,000rpm.

Ram head and BT-50 Clamping system 

  • Head type is square ram. It provides maximum stability during heavy cutting.
  • The square ram is balance by hydraulic ram cylinder built in saddle. Hydraulic counter balance protect ram drop by magnetic brake equipment with Z-axis servo motor and pilot check valve at power failure.

Turning toolholder clamping 

  • In addition to the BT-50 tool pulling design, there are 4 additional auxiliary pulling kits. That help to increase stability during heavy cutting.

CF Axis

  • The c-axis is driven by servo motor combined with transmission throug double worms for smooth rotation and minimized backlash.

Rotary encoder

  • The C-axis equipped with a rotary encoder, enabling the positioning accuracy and repeatability to achieve superb standard.

Table drive gearbox

  • the table rotation is transmitted through a proprietary gearbox, provid-ing high/low speed ranges.A forced circulated lubrication lubrication system is used for lubricating gears.

Gear reducer ON  X/Z  Axis

  • X/Z axes are transmitted through planetary gear reducers to increase torque, ensuring stability for heavy cutting conditions.

Table bearings

  • Ample thrust and radial bearing provide excellent loading capacity for workpiece and table and greater cutting force resistance.

Coolant through spindle (CTS)

  • The CTS is applied when performing milling operations.
  • The coolant through spindle device delivers coolant at 20 bars of pressure to the cutting edge, allowing the machine to perform deep hole drilling. (only for MVL-M)

Cross-Rail clamping auxiliary system 

  • The cross-rail clamping auxiliary system will increase the stability for the cross-rail and column when machining.

 

 

ML-560S

CNC LATHE

TURRET TYPE

 

About ML series, the guideline of lathe is high-performance, high – reliability, and high-efficiency, so as to meet a wide range of needs, from machining compact precision workpiece to heavy duty machining.

About the legend lathes, ML series can be configured to suit many different mass production while with bar feeder, gantry loader, built-in robot arm, or robot cell.

Whether the solution involves a stand-alone machine, multi-process equipment, or an integrated manufacturing system with robotic automation, our goal remains the same: to minimize your manufacturing cost, and to maximum the quality and quantity.

 

The 560S/560M and 600S/600M/600L have been designed to offer full lineup of high level 8″ to 12″ chuck with YDPM servo turret and YDPM gear box. to offer you the best choice.

 

 

BML-560S

CNC LATHE

TURRET TYPE

 

 

BML series can be configured to suit many different mass production while with bar feeder, gantry loader, built-in robot arm, or robot cell. All lathes are high performance, high reliability, so as to meet a wide range of needs, from machining compact precision workpiece to heavy duty machining.  The 560S/560M and 600S/600M/600L have earned reputation of little thermal displacement after long-time cutting. All have been module designed to offer lineup of high level 8″ to 12″ chuck size, with diver-gence from 2 axis to Y-axis, sub-spindle, YDPM servo turret and YDPM gear box.

 

 

BML-600S

CNC LATHE

TURRET TYPE

 

 

 

               BML series can be configured to suit many different mass production while with bar feeder, gantry loader, built-in robot arm, or robot cell. All lathes are high performance, high reliability, so as to meet a wide range of needs, from machining compact precision workpiece to heavy duty machining.  The 560S/560M and 600S/600M/600L have earned reputation of little thermal displacement after long-time cutting. All have been module designed to offer lineup of high level 8″ to 12″ chuck size, with diver-gence from 2 axis to Y-axis, sub-spindle, YDPM servo turret and YDPM gear box.

 

 

 

RC-32

CNC LATHE
GANG TYPE
 
          RC 2-Axis series CNC automatic lathe is using Gang Type live tool holder system which can save tool change time, it is also can be an ideal machine to re-process work pieces. Servo motor live tool holder can be chosen as optional for tapping, drilling, grooving, etc. RC series machine is designed for producing component for electronic connectors, computer, car, hard-ware accessories, food processing machine. We aim to increase your work efficiency through taking full advantage of RC 2-Axis series machine.

  • Gang type tooling system, fast tool changing time.
  • Servo motor live tool can be chosen as optional for tapping, drilling, grooving.
  • Ideal for producing components for electronic, hardware, car, food processing accessories

Live Tools provide more variable machining works.

Optional Single-Piece Automatic Feeding enables work piece 180 degree turning for backside operation.

Precision C-Axis indexing function is equipped as the standard.

 

 

 

 

Message Us!
close slider

Name

Email

Subject

Message