VL-850

MACHINING CENTER

VERTICAL MACHINING CENTER

 

 

 

 

 

  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm.

 

 

 

MH-500

MACHINING CENTER
HORIZONTOL MACHINING CENTER

 

 

  • Powerful 20 hp Spindle Motor
  • 10000 Rpm Spindle
  • Swing Arm Type ATC, 40/60 Tools
  • Dual Pallets Swing Type APC System
  • Heat Exchanger for Electrical Cabinet
  • Chip Conveyor and Chip Bucket
  • C2 Class Double Anchored Ballscrews
  • Rigid Tapping & Helical interpolation Function
  • Bell-Shaped Acc./Dec Before Look Ahead Interpolation
  • Al Advanced Preview Control

Extremely Rigid Mobile Column Structure

Extremely Rigid Mobile Column with linear guide ways assures stability and cutting accuracy while allowing rapid traverse of the X,Y and Z axes.

 

High Speed Linear Guideways

Rugged massive linear guideways on X,Y and Z axes maintain precision and assures a rapid traverse rate.

 

Pallet Changer

The APC twin pallet system is manually indexed with standby pallet during work piece loading and unloading, and is ideal for automatic machining.

 

Automatic Tool Changer

The tool magazine, coupled with rapid tool change and random access selections, saves time and increases productivity. A servomotor controls the magazine to produce smooth, precise, and reliable positioning. MH-500:STD 40, OPT 60

 

High Precision & Rigid Spindle

Durable and accurate spindle bearings provide high torque, rigidity and precision. The high torque spindle motor and spindle support bearing arrangement provides an efficient cutting performance.

MH-630

MACHINING CENTER

HORIZONTOL MACHINING CENTER

 

 

High Speed Linear Guideways

Rugged massive linear guideways on X, Y and Z axes maintain precision and assures a rapid traverse rate.

 

Automatic Tool Changer

The tool magazine, coupled with rapid tool change and random access selections, saves time and increases productivity. A DC motor controls the magazine to produce smooth, precise, and reliable positioning. STD 60, OPT 80

 

Extremely Rigid Mobile Column Structure

Extremly rigid Mobile column with linear guide ways assures stability and cutting accuracy while allowing rapid traverse of the X, Y and Z axes.

 

Tool Measuring System (Opt)

Reduce machine down time and saving machining time. By precisely tool length and diameter measuring; tool offset can be automatic compensated. Broken tool inspection can be executed under machining cycle.

 

High Quality Cast Iron Frame 

For the ultimate in rigidity and stability, the MH-630 employs Meehanite, the finest alloy in the word.

 

Word Piece Measuring System (Opt) 

Allows work piece measurement and automatic work piece offset compensation during the machining cycle. Reduces machine down time from initial work piece  manual measuring. Probe operating range is 360 with infra-red transmissions up to 4M

 

 

TP510-APC

MACHINING CENTER

TAPPING CENTER

  • APC- Work table can be divided into two working areas to lower table exchange time.
  • Spindle direct type design, reduce noise, backlash, vibration.
  • Enlarged 3 axis ball screw design with high stiffness.
  • Enlarged foundation block and strengthened machine base.
  • Cutting chips are efficiently conveyed to the rear side of machine, chip removal is reliable and efficient.

VD-510S

MACHINING CENTER

TAPPING CENTER

  • Front side disc type ATC
  • Multi-link floating arm structure design efficiently shortens tool change time and reduces the vibration. Build-in SENSOR with high distinguishable signal light is designed for easy maintenance. Light weight aluminum alloy but rigid structure of magazine body & tool disc decreases Light weight aluminum alloy but rigid structure of magazine body & tool disc decreases magazine rotating inertia and spindle inertia load. High toughness compound gripper protects spindle during tool change. Individual unit design on grippers allows easy replacement after long period of use or consuming.
  • ATC springs and fix bolts
  • Big size alloy springs offer quick & smooth tool change and extend its service life. Fix bolts on each end of the spring are made of titanium alloy, which assures longer service life of ATC.
  • High rigidity, high efficient design
  • X & Y axes rapid feed rate is 48 M/min, Z axis is 60 M/min. New disc type ATC remarkably shortens SENSOR reaction time. Tool change time is only 1.6 sec (T-T), 2.5 sec (C-C), 2.8 sec (Opposite Side) by servo motor. (With inverter motor, tool change time is 1.8 sec (T-T), 2.8 sec (C-C), 3.5 sec (Opposite Side).) Rigid casting design provides sufficient rigidity during high speed movement and heavy cutting, which is not only suitable for drilling & tapping but also for engraving & milling.
  • Machining examples
  • Spindle motor
  • With new type Mitsubishi low inertia spindle motor, spindle response time is greatly shortened. It takes only 1.0 second for spindle to run up to 12000 rpm from 0 rpm. During continuous & repeating acceleration or deceleration rigid tapping process such spindle speed cooperates with 3 axes rapid movement can greatly shorten machining time and improves machining efficiency.
  • Full enclosed index cam
  • Full enclosed index cam structure ensures the stability of the parts in ATC which also prevents the dust & mist generated during the machining. Servo motor and inverter motor for ATC rotating position are both available. Transmission is by high precision ground gear.

 

VL-510

MACHINING CENTER

VERTICAL MACHINING CENTER

 

  • Reliable Armless Type ATC

The 12T (VL-510) or 16T (VL-610) armless type ATC unit is employed. The 20T (VL-510) or 24T (VL-610) arm is optional.

  • Manford VL-510 /610

The enhanced rigidity of the spindle head and machine structure is the solid platform for high speed cutting.

Axis motors arm direct coupled with ball screws, featuring highly efficient motion control, high response and low noise.

 

 

 

VL-550

MACHINING CENTER

VERTICAL MACHINING CENTER

  • BT-40 / CAT40 / DIN40 spindle (Φ120mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ32mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm

 

 

VL-610

MACHINING CENTER

VERTICAL MACHINING CENTER

 

 

 

 

  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ120mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm

 

 

VL-1000

MACHINING CENTER

VERTICAL MACHINING CENTER

 

 

 

 

 

 

  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Special design Weight Balance leadscrew with needle bearings for better support and smooth movement.

 

 

 

A-600

MACHINING CENTER

VERTICAL MACHINING CENTER

 

*AGMA once again presents high speed A-series machining centers to a foresighted customer like you with industry-leading scraping technology of hardened box way and the technological capacity of manufacturing process.

This series of machines are based on high-rigidity Meehanite cast iron and adopt 10,000/12,000/15,000RPM direct driven spindle. Three axes adopt high precision linear guideways and ball screws. Other optional accessories which fully comply with a variety of cutting demand are also available.

Synchronously adopt the European & Japanese design
1. Wide-span rigid column
2. Taiwan-made PMI extra-large 30mm precise roller- rail linear guide way (option)
3. Adopt high-end direct motors and high rigidity couplings in three axes

Extra-large Z-axis motor
1. 3.0KW (no counter balance design)

High reliable and high accuracy ballscrew design
1. Ø30mm high class double nut provides strong rigidity, high torque, better accuracy, long-life, and effectively heat extension control.

Extra wide door design
1. The width of door reaches 725mm for conveniently loading and unloading the fixture and workpiece.

Extra wide door design
The width of door reaches 725mm for conveniently loading and unloading the fixture and workpiece.

Stable air supply equipment
1. The gas storage barrel assists to acquire steady air source to increase equipment utility rate.

Unique Column Design
Single central screw type chip auger collocates left and right sides flush toremove the chip from front to back.

Chip Auger motor shrinks within to reduce the distance of the front sheet metal for ergonomics improvment on the ease of workpieces loading and unloading.

 

Message Us!
close slider

Name

Email

Subject

Message