VL-850

MACHINING CENTER

VERTICAL MACHINING CENTER

 

 

 

 

 

  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm.

 

 

 

UH-400/1000AGC

GRINDING
UNIVERSAL GRINDING

* Heavy bed provides a rigid base to carry all units and possesses great stiffness, sufficient slideway length to support the table in all position.
* Eight-speed type workhead with all belt driven provides full power at all speeds.
* Wheel spindle is induction hardened and precision ground.
* Wheel spindle lubricates automatically and is electrically interlockes with motor. These ensure the durability of the grinding wheel spindle and bearings, and also the roundness, superior finishing of the workpiece.
* Hydraulic table traverse has end dwell at both ends of the stroke, and is equipped with independent, stepless speed controls, for both directions.

 

 

MH-500

MACHINING CENTER
HORIZONTOL MACHINING CENTER

 

 

  • Powerful 20 hp Spindle Motor
  • 10000 Rpm Spindle
  • Swing Arm Type ATC, 40/60 Tools
  • Dual Pallets Swing Type APC System
  • Heat Exchanger for Electrical Cabinet
  • Chip Conveyor and Chip Bucket
  • C2 Class Double Anchored Ballscrews
  • Rigid Tapping & Helical interpolation Function
  • Bell-Shaped Acc./Dec Before Look Ahead Interpolation
  • Al Advanced Preview Control

Extremely Rigid Mobile Column Structure

Extremely Rigid Mobile Column with linear guide ways assures stability and cutting accuracy while allowing rapid traverse of the X,Y and Z axes.

 

High Speed Linear Guideways

Rugged massive linear guideways on X,Y and Z axes maintain precision and assures a rapid traverse rate.

 

Pallet Changer

The APC twin pallet system is manually indexed with standby pallet during work piece loading and unloading, and is ideal for automatic machining.

 

Automatic Tool Changer

The tool magazine, coupled with rapid tool change and random access selections, saves time and increases productivity. A servomotor controls the magazine to produce smooth, precise, and reliable positioning. MH-500:STD 40, OPT 60

 

High Precision & Rigid Spindle

Durable and accurate spindle bearings provide high torque, rigidity and precision. The high torque spindle motor and spindle support bearing arrangement provides an efficient cutting performance.

MH-630

MACHINING CENTER

HORIZONTOL MACHINING CENTER

 

 

High Speed Linear Guideways

Rugged massive linear guideways on X, Y and Z axes maintain precision and assures a rapid traverse rate.

 

Automatic Tool Changer

The tool magazine, coupled with rapid tool change and random access selections, saves time and increases productivity. A DC motor controls the magazine to produce smooth, precise, and reliable positioning. STD 60, OPT 80

 

Extremely Rigid Mobile Column Structure

Extremly rigid Mobile column with linear guide ways assures stability and cutting accuracy while allowing rapid traverse of the X, Y and Z axes.

 

Tool Measuring System (Opt)

Reduce machine down time and saving machining time. By precisely tool length and diameter measuring; tool offset can be automatic compensated. Broken tool inspection can be executed under machining cycle.

 

High Quality Cast Iron Frame 

For the ultimate in rigidity and stability, the MH-630 employs Meehanite, the finest alloy in the word.

 

Word Piece Measuring System (Opt) 

Allows work piece measurement and automatic work piece offset compensation during the machining cycle. Reduces machine down time from initial work piece  manual measuring. Probe operating range is 360 with infra-red transmissions up to 4M